GM MDI 2 GM Multiple diagnostic interface

GM MDI 2 GM Multiple diagnostic interface

$1,649.00
Ex Tax: $1,649.00
Brand:GM
Product Code: OBD9P0719
Stock Instock


GM MDI 2 GM Multiple diagnostic interface

Contact information:

Email: nineobd@outlook.com

Whatsapp: +8613380507083

Skype: +8613380507083

Line: obd9

Wechat: wucarrie

After-sales service: Free Technical Support

If you have any problem, please do not hesitate to contact us.

The newest pc-based GM Multiple Diagnostic Interface (MDI II) offers increased processing power, security, and faster programming speeds on Global A and future Global B vehicles. The MDI 2 supports diagnostic applications: GDS 2, Data Bus Diagnostic Tool, and Tech2Win. It also supports Pass-Thru programming applications: TIS2Web–SPS. It replaces the first generation MDI, introduced in 2007, for Pass-Thru programming on current GM models. The MDI 2 is backward compatible, so it can be used to perform Pass-Thru programming on all vehicles built since 1996.


Features:

Uses a new, more secure Type B connector and Ground Offset Failure protection. A wired connection is recommended for longer programming events.

The MDI 2 is powered from the vehicle battery via the DLC Cable. It may also be powered over USB to perform firmware updates only using a PC.

Uses USB 2.0 for faster firmware downloads instead of a separate AC power supply.

The DLC cable is twice as long as the previous cable and connects at the top, making it easier to use. The cable only connects to the MDI 2.

New Features

 

Wi-Fi Connection – The USB Wi-Fi adapter uses a USB dongle that enables Point-to-Point connections without the need for Wi-Fi SSID information or a wireless router.

USB Connection – Uses a new, more secure Type B connector and Ground Offset Failure protection. A wired connection is recommended for longer programming events.

Power Source – The MDI 2 is powered from the vehicle battery via the DLC Cable. It may also be powered over USB to perform firmware updates only using a PC.

Power Backup – Internal batteries that were used in case of a power interruption have been removed, which eliminates the possibility of old batteries corroding over time and damaging the unit. Capacitors maintain power during engine cranking, so operation is maintained.

Firmware Download – Uses USB 2.0 for faster firmware downloads instead of a separate AC power supply.

Future Expansion – Additional USB ports, an SD memory card slot and Function buttons are built into the unit for future enhancements.

Operating Temperature Range – The temperature range has been extended to -20° to 70°C (the MDI range was zero to 50° C).

DLC Cable – The DLC cable is twice as long as the previous cable and connects at the top, making it easier to use. The cable only connects to the MDI 2. A self-test adapter (accessed through the MDI Manager) can be used to test the integrity of the cable.

 

MDI Manager Software

 The MDI Manager must be installed on the PC in order to configure, update and run diagnostic applications targeted for the PC.  Initially, use the MDI Manager software to set up the configuration of the MDI 2. The MDI Manager is also used to update the firmware on the MDI 2. Visit the TIS2Web/GlobalTIS website to determine if a newer version of MDI Manager software is available.

 

Wireless Dongle Setup

 The first time the MDI 2 is used, the point-to-point USB dongle must be paired with the PC, which will install the necessary drivers on the computer. One dongle should be plugged into the PC and one into the MDI 2.  The dongles are identical. Use either one for either connection. Remove the bottom dust cover to access the port.

 

TIP: Do not plug the dongle into a USB hub. It must be plugged directly into the computer.

PACKAGE LIST:

  • MDI 2 Unit
  • SAE J1962 DLC Cable 
  • 10-ft. USB A to USB B Cable 
  • Ethernet Cable
  • D-Link Wireless USB Adapters(Dongle) (Optional; for wireless connection) 

Write a review

Note: HTML is not translated!

Rating Bad           Good